Customs - Tariff Book Last updated: 01 Jan 2020
SA Customs Tariff (Schedule 1 Part 1) Print
Notes
1.
This Section does not cover the following:
(a)
Prepared paints, inks or other products with a basis of metallic flakes or powder (headings 32.07 to 32.10, 32.12, 32.13 or 32.15);
(b)
ferro-cerium or other pyrophoric alloys (heading 36.06);
(c)
headgear or parts thereof of heading 65.06 or 65.07;
(d)
umbrella frames or other articles of heading 66.03;
(e)
goods of Chapter 71 (for example, precious metal alloys, base metal clad with precious metal, imitation jewellery);
(f)
articles of Section XVI (machinery, mechanical appliances and electrical goods);
(g)
assembled railway or tramway track (heading 86.08) or other articles of Section XVII (vehicles, ships and boats, aircraft);
(h)
instruments or apparatus of Section XVIII, including clock or watch springs;
(ij)
lead shot prepared for ammunition (heading 93.06) or other articles of Section XIX (arms and ammunition);
(k)
articles of Chapter 94 (for example, furniture, mattress supports, lamps and lighting fittings, illuminated signs, prefabricated buildings);
(l)
articles of Chapter 95 (for example, toys, games, sports requisites);
(m)
hand sieves, buttons, pens, pencil-holders, pen nibs, monopods, bipods, tripods and similar articles or other articles of Chapter 96 (miscellaneous manufactured articles); or
(n)
articles of Chapter 97 (for example, works of art).
2.
Throughout this Schedule, the expression "parts of general use" means:
(a)
articles of headings 73.07, 73.12, 73.15, 73.17 or 73.18 and similar articles of other base metals;
(b)
springs and leaves for springs, of base metal (excluding clock or watch springs (heading 91.14)); and
(c)
articles of headings 83.01, 83.02, 83.08, 83.10 and frames and mirrors, of base metal, of heading 83.06. In Chapters 73 to 76 and 78 to 82 (but not in heading 73.15) references to parts of goods do not include references to parts of general use as defined above.
Subject to the preceding paragraph and to Note 1 to Chapter 83, the articles of Chapter 82 or 83 are excluded from Chapters 72 to 76 and 78 to 81.
3.
Throughout this Schedule, the expression "base metals" means: iron and steel, copper, nickel, aluminium, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium antimony, manganese, beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium, (columbium), rhenium and thallium.
4.
Throughout this Schedule, the term "cerments" means products containing a microscopic heterogeneous combination of a metallic component and a ceramic components. The term "cermets" includes sintered metal carbides (metal carbides sintered with a metal).
5.
Classification of alloys (excluding ferro-alloys and master alloys as defined in Chapters 72 and 74):
(a)
An alloy of base metals is to be classified as an alloy of the metal which predominates by mass over each of the other metals;
(b)
An alloy composed of base metals of this Section and of elements not falling within this Section is to be treated as an alloy of base metals of this Section if the total mass of such metals equals or exceeds the total mass of the other elements present;
(c)
In this Section the term "alloys" includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (excluding cermets) and intermetallic compounds.
6.
Unless the context otherwise requires, any reference in this Schedule to a base metal includes a reference to alloys which, by virtue of Note 5 above, are to be classified as alloys of that metal.
7.
Classification of composite articles: Except where the headings otherwise require, articles of base metal (including articles of mixed materials treated as articles of base metal under General Note A to this Schedule) containing two or more base
metals are to be treated as articles of base metal predominating by mass over each of the other metals. For this purpose:
(a)
iron and steel, or different kinds of iron or steel, are regarded as one and the same metal;
(b)
an alloy is regarded as being entirely composed of that metal as an alloy of which, by virtue of Note 5, it is classified; and
(c)
a cermet of heading 81.13 is regarded as a single base metal.
8.
In this Section, the following expressions have the meanings hereby assigned to them:
(a)
WASTE AND SCRAP: Metal waste and scrap from the manufacture or mechanical working of metals, and metal goods definitely not usable as such because of breakage, cutting-up, wear or other reasons.
(b)
POWDERS: Products of which 90 per cent or more by mass passes through a sieve having a mesh aperture of 1 mm.
Note
1.
In this Chapter the following expressions have the meanings hereby assigned to them:
(a)
BARS AND RODS: Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified-rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified-rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
(b)
PROFILES: Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de- scaling), provided that they have not thereby assumed the character of articles or products of other headings.
(c)
WIRE: Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.
(d)
PLATES, SHEETS, STRIP AND FOIL: Flat-surfaced products (excluding the unwrought products of heading 76.01), coiled or not, of solid rectangular (excluding square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
-
of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
-
of a shape (excluding rectangular or square), of any size, provided that they do not assume the character of articles or products of other headings. Headings 76.06 and 76.07 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
(e)
TUBES AND PIPES: Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
Subheading Notes
1.
In this Chapter the following expressions have the meanings hereby assigned to them:
(a)
ALUMINIUM, NOT ALLOYED: Metal containing by mass at least 99 per cent of aluminium, provided that the content by mass of any other element does not exceed the limit specified in the following table:
| Element | Limiting content per cent by mass |
|---|---|
| Fe + Si (iron plus silicon) | 1 |
| Other elements (¹), each | 0,1 (²) |
(1)
ther elements are, for example, Cr, Cu, Mg, Mn, Ni, Zn.
(2)
opper is permitted in a proportion greater than 0,1 per cent but not more than 0,2 per cent, provided that neither the chromium nor manganese content exceeds 0,05 per cent.
(b)
ALUMINIUM ALLOYS: Metallic substances in which aluminium predominates by mass over each of the other elements, provided that:
(i)
the content by mass of at least one of the other elements or of iron plus silicon taken together is greater than the limit specified in the foregoing table; or
(ii)
the total content by mass of such other elements exceeds 1 per cent.
2.
Notwithstanding the provisions of Chapter Note 1(c), for the purposes of subheading 7616.91 the term "wire" applies only to products, whether or not in coils,of any cross-sectional shape, of which no cross- sectional dimension exceeds 6 mm.
Additional Notes
1.
The following definitions apply to the goods mentioned in tariff subheadings 7602.00.10, 7602.00.20, 7602.00.30 and 7602.00.40-
(a)
TAINT/TABOR - Clean mixed old alloy sheet aluminium:
(i)
Shall consist of clean old alloy aluminium sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items.
(ii)
Oil and grease not to total more than 1%.
(iii)
Up to 10% Tale permitted.
(b)
TALK - Aluminium copper radiators:
(i)
Shall consist of clean aluminium and copper radiators, and/or aluminium fins on copper tubing, free of brass tubing, iron and other foreign contamination.
(c)
TENSE - Mixed aluminium castings:
(i)
Shall consist of all clean aluminium castings which may contain auto and airplane castings but no ingots, and to be free of iron, brass, dirt and other non-metallic items.
(ii)
Oil and grease not to total more than 2%.
(d)
TRUMP - Aluminium auto castings:
(i)
Shall consist of all clean automobile aluminium castings of sufficient size to be readily identified and to be free form iron, dirt, brass, bushings, and non-metallic items.
(ii)
Oil and grease not to total more than 2%.
| Heading | CD | Description | Unit | General | EU | EFTA | SADC |
|---|---|---|---|---|---|---|---|
| 76.04 | Aluminium bars, rods and profiles: | ||||||
| 7604.10 | - Of aluminium, not alloyed: | ||||||
| 7604.10.90 | 3 | -- Other | kg | free | free | free | free |
Disclaimer: Information is provided as a free service and is for reference purposes only. It does not constitute the provision of professional advice of any kind. No responsibility for any loss caused to any person acting or refraining from action as a result of any material in this publication can be accepted by the author, copyright owner or publisher. Tariff information should be confirmed with SARS.